Physics > Atoms > An Atom The Size Of Your Head

Site: http://www.eskimo.com/~billb/emotor/sticky.html

Grade Category: Middle School

Subject Category: Physics

Sub Category: Atoms


From another viewpoint, peeling the tape causes atoms to become enormously stretched, because the outer electrons of one set of atoms has been pulled far away from their protons. Weird fields of force are still connecting the separated protons and electrons, but these fields had originally existed only down within the microscopic world of the atoms. Stretching out the atoms in this way also "stretches" the tiny atomic force fields. This adds energy to them and causes them to balloon outwards and grow so large that they start to affect us here up in our "macro" world. The invisible attracting/repelling fields which surround electrified objects are the same force-fields normally only found inside of atoms.

So everyday "static electricity" has little to do with rubbing or friction. Instead it involves contact, chemistry, and imbalances in the electrical charges of which matter is made. Electrostatic attraction and repulsion between electrified objects is a feeble residue of the same immense forces which hold solid matter together. Our bodies are held together by "static electricity!" And when a huge crane lifts a steel beam, the immense force within the steel cable is actually an electrostatic force field between the atoms of the cable.

If the surfaces involved in contact electrification are rough or fiberous, then only a tiny part of the surfaces can be touched together at a time. If a balloon is touched against hair, the hair only touches the rubber in tiny spots. The "footprint" of contact area will be a tiny percentage of the total surface. In a situation like this, friction does play a role. If the balloon is DRAGGED across the hair, then the successive areas of contact add up to a much larger percentage. Rubbing a balloon on your head increases the total area of rubber and hair that's being touched, so it also increases the total amount of separated charges. Friction aids the charging effect, but friction does not create it.


So why do strips of tape become charged? Adhesive tape is not a single material. The adhesive and the plastic backing are two different insulators. When they are touched together, one surface steals electrons from atoms of the other, and the surfaces become electrified. When they are peeled apart, atoms are torn open and opposite charges are separated. The tape can then attract and repel distant charges.


There are other things you can try. Take two lengths of tape, discharge them between fingers so they no longer repel each other, then fold little tabs and stick them so the adhesive sides stick together. Adhesive to adhesive. Now peel them apart, then bring them near again. They will neither repel nor attract. No separation of charge occurred because the materials on both sides were the same. DISSIMILAR materials are required in order to create separated charge. (This trick can be used to fool people. If you stick YOUR tape strips back to front, but tell someone else to stick THEIRS front to front, they won't notice the difference. When then peeled apart, your strips will attract, but theirs will not! You can then explain your trickery, and teach them a bit of Electrostatic trivia at the same time.)


You may have noticed that your charged tape-strips don't only attract and repel other strips, they also attract everything else! Hold a charged strip near your arm, or the wall, near most any neutral object, etc., and the strip will be attracted. Regardless of whether your tape strip is positive or negative, it will attract a neutral object. A general rule: charged objects always attract uncharged objects. Why? Because the charged object causes the charges inside the uncharged object to separate a bit. If you hold a positively charged strip of tape near the wall, the charge on the tape strip will cause negative charges in the substance of the wall to move a bit toward the tape. At the same time, positive charges in the wall move away from the tape. The tape is then attracted to the negative charges in the wall. This is called "attraction by induction," since the charged tape "induces" a separation of charge to occur in the wall. Induction works better with conductors, since the charges in a conductor are free to move. If you hold your tape strip near a metal object such as a refridgerator door, it will be pulled a bit more strongly than the wall pulls it. Hold the strip near your arm, and the pull is strong. Your body is salty water, you are a conductor.


How can you tell which tape strip is positively charged, and which is negative? Easy: by comparing them against a known polarity. An expensive and dangerous way to do this is to string 9-volt batteries together until the voltage adds up to several thousand volts. The positive end of the chain will attract negatively charged tape and repel the positive. Don't touch the battery chain, the high-current capability makes them lethal! A safer, easier way: When you rub a balloon on hair, the balloon's rubber always becomes negatively charged. To determine the polarity of a tape strip, hold it near a hair-charged balloon. If the strip is negative, the balloon will repel it. If the strip is positive, the balloon will attract it.


Here's a way to demonstrate part of the "Xerographic" process used by photocopiers and laser printers. Obtain a flat piece of clear or dark plastic 1/16" thick or thicker, talcum powder, a rag, and some tape. Peel off a strip of tape, discharge it between fingers, fold a tab at one end, and stick it securely over the surface of the plastic. Put down some newspaper so you don't get talcum powder all over, then sprinkle talcum powder on the rag and rub it in. Now peel the tape off the plastic, then shake the rag to make a cloud of talcum powder dust in the air near the plastic. The charged area on the plastic surface will attract the powder, and a "charge image" will appear. If your plastic was clear, try holding it against a dark background to make the white powder more visible. (This experiment works best when humidity is fairly low.)

If you can find a big piece of acrylic from a hardware store, try laying several pieces of tape on it to form your initials or to form a simple word. (Always fold little tabs at one end of each strip.) When you peel all the strips of tape and make a dust cloud, you should then be rewarded with a clear example of electric-charge writing.

Another demo: get some wide packaging tape, a marker, and a paperclip (as well as talcum powder, etc.) Stick the tape to the plastic, and unbend the paperclip to give you a sharp pointed tool. Use the marker to outline the tape (and where the charged area will be.) Peel the tape from the plastic, then lightly draw a large invisible "X" on the invisible charged area on the plastic. Flap the talcum-cloth, and you'll find that the dust cloud is attracted to the charged area as usual, but the "X" will be visible as a dust-free zone. The sharp point of the paperclip wire acted to discharge the plastic. Actually, a tiny corona discharge or "St. Elmo's Fire" was generated on the sharp wire point. Alike-charged air spewed out of the corona, and the opposite-charge air settled onto the plastic, cancelling out the surface charge. With skill (and a big piece of plastic,) you should be able to write several words on a long tape-charged area. Hint: paint one side of the plastic black for contrast. Another hint: try charging the plastic by rubbing it with fur or wool cloth, then write big invisible letters with the paperclip end. Clouds of talcum dust should make it visible.

In a copier, the talcum powder is replaced by black "toner" powder. The plastic plate is replaced by a light-sensitive coating on a metal drum, which discharges bits of itself wherever light lands on it. The charging device is a long thin wire with high-voltage corona on it that sweeps over the drum. The flapping cloth is replaced by a fuzzy brush made of iron filings stuck to a long magnet, and covered with black toner powder. And finally, the black powder melts when heated, so a red-hot "fuser" bar passes over the black dusty paper and makes the writing permanent.